Home / Our Blog / How to clean and care for your trail running shoes

How to clean and care for your trail running shoes

How to clean and care for your trail running shoes

A dusty fire trail can leave grit in places you didn’t know your shoes had. Add a muddy creek crossing and you’ve got a pair that needs a little attention before the next run. The good news? A brush, a cloth and some time to air-dry will cover most outings. 


The quick answer: Shake out grit, brush the tread and clean the uppers by hand with lukewarm water. Take out removable insoles and let everything air-dry away from direct heat. Check the care instructions for your specific pair before using a cleaner or water-repellent treatment. 



 

 

 

 

1. Start with the soles and shake out the grit 

 

Tip each shoe upside down to dislodge sand and small stones. Use a brush or old toothbrush to clear mud from between the lugs—the raised bits of tread on the sole. A little water can help loosen packed mud. Keep the firmer brush for the outsole and switch to a soft one for the upper. 

 

Loosen the laces so you can get to the tongue and the area underneath. Remove the insoles if they’re designed to come out. If your shoes have a quick-lacing system, open it up for cleaning and leave the mechanism assembled unless the manufacturer says otherwise. 

 

 

2. Clean the uppers by hand 

 

For mesh and fabric, start with a damp cloth or soft brush and lukewarm water. If plain water isn’t enough, use a small amount of mild soap or a footwear cleaner if your shoe’s care instructions allow it. Work gently over the dirty areas, especially around seams and overlays, then wipe away the residue with a clean, damp cloth. 

 

Leather, suede and nubuck can need different care, so use a product suited to the material. Skip the washing machine and tumble dryer, and avoid soaking the whole shoe as part of a routine clean. 

 

 

3. Dry them before you put them away 

 

Open the shoes up and leave them somewhere shaded with good airflow. Dry removable insoles separately. If the shoes are soaked, loosely tuck plain paper towel inside to absorb moisture and replace it once it’s damp. Take it out as the shoes dry so air can circulate inside. 

 

Skip the heater, hot car boot and direct sun. Before you put the insoles back, check inside the toe box—it can still feel damp even when the outside looks dry. 

 

 

4. Reproof waterproof shoes only when they need it 

 

Clean the shoes first. If water still soaks into the outer fabric instead of beading on the surface, check whether the manufacturer recommends renewing the water-repellent finish. That finish helps water roll off the upper; it’s separate from the waterproof lining and won’t repair a tear or a leak. 

 

For compatible GORE-TEX footwear, follow the shoe maker’s directions and choose a suitable water-based pump spray. Grangers Footwear Repel Plus is a footwear treatment to consider if it’s suitable for your pair. Follow the bottle directions for application, and avoid waxes or greases on GORE-TEX shoes. 

 

 

5. Check the wear while your shoes are clean 

 

Look for frayed laces, worn-down lugs, tears in the upper or a sole that’s starting to lift. If a lace is the only thing that’s worn, check the replacement options in our footwear care and accessories range. The Salomon Quicklace Kit is an option for compatible Salomon shoes. 

 

If you’ve lost grip on terrain you normally run with confidence, or the sole is separating, have the shoes checked before your next trail run. Your local Kathmandu store can help you work out what to look for in your next pair. 

 

 

 

 

 

 

A couple of common trail shoe care questions 

 

Do I need to wash my trail runners after every run? 

 

No. After a dry run, shaking out the grit and brushing the tread is often enough. Give them a hand clean when mud is stuck to the uppers or the tread is packed with dirt. 

 

How do I stop my trail runners from smelling? 

 

Take them out of your gear bag when you get home and open the laces so the inside can air out. If the insoles are removable, air them separately and clean them according to the maker’s instructions when needed. Store everything once it’s dry. 

 

 

 

Ready for your next run? 

 

If your old pair is due for replacement, start with our guide to choosing trail running shoes. For soft, muddy terrain, compare the women’s Salomon Speedcross 6 and men’s Salomon Speedcross 6, or browse the full trail running shoe range to find a fit for the tracks you run most.